Isotherm CR130 DRINK Inox Stainless Steel Matched Fridge
12 or 24 Volts – 130 Litre Fridge Only – Left or Hand Door Hinge (please choose) -Matches Isotherm CR130 Inox Fridges and CR90F Freezer
Suitable for Boats-Caravans-Motorhomes and RVs
Variation A: Left Hand Door Hinge Position
Variation B: Right Hand Door Hinge Position
12-24 volt flush mounted cabinet style refrigerators with stainless steel doors and trims that are well suited for the marine environment.
- Food preparation compliant stainless steel case
- Flush mounted – no protrusion into galley area
- Positive, flush closing mechanism
- Hermetic fan cooled compressor
- Contoured single piece plastic liner
- Adjustable shelves
- Internal light
- Low voltage cut off
- Radio interference suppression
- Internal rotary thermostat
- Utilises R134A ozone friendly refrigeration gas
- Capacity: 130L
- Dimensions: 543D x 582W x 771H mm
- Weight: 23kg
- Power: 12/24VDC
- Power consumption at 12V: Average – 1.4 A Max – 5.2 A
When connecting the refrigerator electrically, it is important that following points are considered:
Always use cables of suffi cient area. The area in the following table should be regarded as a minimum. * Always connect the refrigerator directly to the battery or to the battery main switch on the plus circuit. Do not connect it via the boats own control panel or other diversions as this can cause a voltage drop in the power supply. Use the included fuse holder with a 15A fuse. Use 7.5A fuse in a 24 volt system. The fuse shall be mounted on the plus cable.
*Connect the red cable to the positive (+) terminal and the black to the negative (-) terminal. Use tab type terminals for the connection to the electronic unit and other cable connectors of sufficient size for the cable size selected. * Do not connect the refrigerator direct to a battery charger. The battery charger must be connected to the battery.
Battery Voltage (Shut Down) Sensor:
To protect the batteries from becoming completely discharged, a battery voltage sensor switches off the compressor automatically at the following levels:
The correct wire gauge and type must be used.